TRUFLOW Spray Booths Hone Page
 

Spray Booths Current Project Installations and Client Portfolio

Home Portfolio
 

Truflow Spray Booths (Aust) Pty Ltd is a trusted Australian manufacturer and designer of custom spray facilities. We have implemented and installed spray booths Australia wide for a diverse range of industries. Companies from all around the world have trusted their painting solutions to Truflow and the results have been perfectly executed facility solutions in all industries relating to spray painting, panel repair and blast & spray.

Australia wide TRUFLOW booths have been installed for a variety of industries including Automotive repair, Aviation, Industrial, Commercial Trucking and Cabinet Making.

Below we have provided images and installation summaries on past and recently completed projects. Please call us to discuss any of these projects or your own facility on 03-9794 9498 or Contact us now via email

 


Force Access Hire - Melbourne VIC and Perth WA

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
Force Access Industrial Spray Booth
Crossflow Spray Booth Enclosed Filtered Front Door Dry Booth

Painting Industrial equipment and hire equiptment requires a spray booth that will ensure clean air, bright lighting into tricky areas and high exhaust rates within an enclosed cabin. While a few different options apply to achive this, the solution for Force Access was based on the volume of paint and production hours they would be using the booth.

When looking at what is required to achieve compliance and what is a suitable and economical solution we ran through multiple designs with Force and we found that the crossflow enclosed booth was the best fit for their workplace. The solution solved painting compliance issues and fitted within their budget.

This facility was installed in 2013 to Melbourne and Perth Branches.

 
Click here to see more on, Industrial spray painting booths
 

KRUEGER Transport - Melbourne VIC New Trailer Manufacturing Facility
Krueger Truck Spray Booth installation  

Truck Trailers, when painted in high volume require a fast and efficient baking, Krueger Transport's solution was of no exception. As the largest manufacturer of trailers in Australia Krueger had high demands and high expectations of a paint facility they were to install in the new Western Melbourne facility. The spray booths installed included one drive through downdraft spray booth, two single entry downdrafts and a large paint mixing room. The entire facility was installed in 6 weeks on site by TRUFLOW's lead installation team.

This state of the art facility is providing high volume throughout, fast baking times and quality finishes. It has set the benchmark for what trailer manufacturers should strive to achieve in a painting facility and TRUFLOW are very proud to have been selected to deliver this facility.

The results speak for themselves. Call TRUFLOW to discuss this project or your own further.

 
Click here to see more on, Industrial spray painting booths, Truck Spray Booths and Ovens
 

DLTP NSW - Defence Australia

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
Defence Installation Spray Booth
Blast and Spray Facility  

Australian Defence Logistics Project required a complete Blast and Spray Solution which allowed TRUFLOW to draw on its vast industry experience and provide a comprehensive and long term solution with quality Australian manufactured blast and spray equipment inlcuding a 12mt Blast Booth and a 12 Mt Spray Booth.

The spray booth and blast room were designed large enough to meet the production targets for a Defence re-furb and assembly facility. The spray booth incorporated baking capability allowing accelerated cure times and high quality durable coatings to all Defence equipment.

This facility was installed in 2014 and will operate for the next scheduled decade.

 
Click here to see more on, Industrial spray painting booths, Blast and Spray Facility,
 

ASR Sydney - Andrews Smash Repairs

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
TRUFLOW 4 Car Preparation Bay
Fast Repair Preparation Bay Infra Red Cure

Installed for Andrews Smash Repairs this prep facility was installed with the goal of improving workshop flow by reducing preparation time, prime coatings and base coat times with multiple vehicles. The result was vastly improved vehicle through put and a large increase in completed cars per day. For a high volume panel shop there could be no better outcome.

This facility was equipped with the REVO infra-red system as well as the multi bay prep zone to allow the use of the IR in multiple bays.

This facility was installed in 2014.

 
Click here to see more on, Infra-Red Revo System Download Brochure, Preparation Bays, Quick Repair Systems
 

Siemens Tram Spray Booth Project


During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
Full Down Draft Industrial Booth
Full Down Draft Industrial Booth Full Down Draft Industrial Booth

Installed for Siemens Australia for a joint venture project between Siemens Germany, Austria and Australia the booth was installed in Melbourne and will be providing a spray painting solution for painting trams in the Melbourne based re-works factory. The airflow application is full downdrafting with full heating operation in spray and bake cycle modes.

The spray booth was designed to be large enough to re-furbish and paint two sections of tram bodies at a time. Efficiency of the system and a turn key installation was a paramount to Siemens. From placement of the order to installation on site the full turnaround time was under 8 weeks ensuring Siemens could maintain their tight repair schedule.

The booth will remain in operation at Siemens until 2012.


Bombardier Train Spray Booth Project

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
 

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
Industrial Train Booth
arge Scale Train Booth Large Scale Train Booth

This system was designed, engineered and installed by TRUFLOW Spray Booths for Bombardier Transport.

The design and engineering process taking weeks to complete was a close collaboration with the client and TRUFLOW's Sales team to ensure that the final outcome achieved was exactly as per the client's expectations. Critical areas were high airflow due to the need by the client to paint within the train body as well as outside, highly light environment, large scale size the addition of paint fume extraction arms and health and safety compliancy.

The result was a High Air Volume Spray Booth complete with high and low level lighting running a independently controlled electrical box with safety gear.

Two of these custom 36 metre long Spray Booths where installed, to the best of TRUFLOW's knowledge they are the longest crossflow type Spray Booths in Australia.


Jayco Caravans - Custom Spray Booth Painting for RV and Motorhomes

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
 

During Construction of Spray Booth

Booth Operating and testing ( Inside Spray Booth)

During Construction - On site Installation
Design to Construction of a Spray Booth
CAD Spray Booth Design Custom Made Spray Booth

Jayco Caravans as Australia's largest campervan manufacturer entrusted the design, engineering and installation of a unique drive through system to TRUFLOW Spray Booths. For a high airflow, versatile, drive through application the system had to be designed from scratch.

The scope of the project involved a product size of over 15 metres long and 6 metres wide. This required an oversized spray booth with a total width of over 8 metres and a length of over 18 metres, all in a drive through format.

The products to be painted would be quite varied and the booth required the option of being fully heated at a later stage. As such a unique crossflow ventilation design was created with separated exhaust filter plenums. The final outcome was very pleasing to everyone. High air volume, installed outside to accommodate for space, highly light environment and provisions for future upgrades to the system.

Safety was of course a key concern and as such the TRUFLOW Spray Booth was engineered and installed with a number of safety mechanisms including alarms and interlocks. The compliant spray booth not only met Australian Standards (4114.1 &.2) but had additional safety mechanisms installed that are a TRUFLOW OH&S standard, ensuring a safe workplace.

Jayco are extremely pleased with the final product.

Melbourne - Sydney - Brisbane - Adelaide - Perth - Tasmania
Large Scale Spray Booth
Train Spray Booth
 
Prep Bays TRUFLOW Systems
Preparation System with Separation Curtains
 
Full Downdraught Install
Automotive Full Downdraught
 
Custom Designed Spray Booths
Custom Spray Booth System Installation and Design
 
Quick Repair OMIA Spray Booth
Mini Smart Repair booth